Wednesday, May 22, 2013

Experiment 12: Polarization of Light

Purpose
The purpose of this experiment is to observe the change in light intensity as it passes through adjacent polarizing filter and to measure the relationship between the transmission of light through two polarizing filters and the angle between the two polarizers' axes.

Preliminary Question
1. When the axis of the two polarizers are at right angle to one another, we can barely see anything through them.
2. When the two axes are parallel, most of the light pass through them.

Experiment

Part 1 - Two Polarizers

Setting and marking the axis of both polarizers to be parallel
to each other using the light sensor

Light is shined toward the light sensor with the pair of polarizers
in between them to measure the intensity read by the light sensor

The second polarizer is rotated by 10 degrees
to see how it affects the measured  light intensity
Data

Angle θ
(o)
Intensity
(clockwise)
(lux)
Intensity
(counterclockwise)
(lux)
Average
Intensity
(lux)
I/Imax
cos2θ
0
204
208
206
1
1
10
201
198
199.5
0.968
0.970
20
189
182
185.5
0.900
0.883
30
172
163
167.5
0.813
0.750
40
150
146
148
0.718
0.587
50
115
113
114
0.553
0.413
60
97
87
92
0.447
0.250
70
83
75
79
0.383
0.117
80
67
63
65
0.316
0.030
90
59
57
58
0.282
0

Analysis
1. The light intensity decrease as the angle between the two axes increases.

 2. Graph of average illumination vs. angle


3. Graph of average illumination vs cos2θ

4. Polarizers polarizes unpolarized light by filtering light that has the same orientation as its axis. When the two polarizers used have their axes parallel to each other, the initial unpolarized light will be polarized by the first polarizer to a certain orientation, and since the second polarizer will orient light to the same orientation, the light won't be polarized anymore as it passes through the second polarizer. On the other hand, when polarizers are perpendicular to each other, no light will be able to pass through the second polarizer.

Part 2 - Three Polarizers

Similar procedure as part 1, however three polarizers are used.
The first and third polarizers are at a right angle with each other.

The second polarizer is rotated every 10 degrees
to note how the measure light intensity varied.
Data

Angle θ
(o)
Intensity
(clockwise) (lux)
cos2θ
0
50
1
10
49
0.970
20
52
0.883
30
58
0.750
40
62
0.587
50
62
0.413
60
58
0.250
70
54
0.117
80
50
0.030
90
48
0

Analysis
1. The light intensity is maximum when the second polarizer is oriented at around 45o with respect to the first polarizer.

2. Graph of light intensity vs. angle

3. Graph of light intensity vs. cos2θ

4. The light intensity is maximum at 45 degrees because the unpolarized light is polarized to, for example, a vertical orientation. The second polarizer will then polarize this polarized vertical light and reorient it to around 45 degrees. This will allow some of the twice polarized light to again be reoriented by the third polarizer which has horizontal orientation.

Polarization upon Reflection
1. There is no polarization on the light from the fluorescent bulb.

2. Yes, there is polarization to the reflected light. When the polarizer was used to see the reflected light, it has the most apparent change when it's parallel to the table.

Conclusion
This experiment is consistent with the theoretical explanation and values.

Sunday, April 28, 2013

Experiment 11: CD Diffraction

Purpose:
The purpose of this experiment is to measure the wavelength of a laser and to measure the distance between the grooves on CD using diffraction.

Experiment:
The wavelength of the laser can be measure using a diffraction grating.

Diffraction pattern can be seen on the board when laser passes through
a diffraction grating
The wavelength can then be calculated as follow


where: L = distance from diffraction grating to the white board
           d = width of slit on the grating
           y = distance between 2 maxima


To measure the distance between the grooves on CD, the following setup is used


Laser is reflected off of the CD and diffraction pattern is
observed on a piece of paper.
The distance between grooves can then be calculated as follow


This value gives us an error of 87% when compared with the expected value which is 1600nm

Conclusion:
Although the experiment has a really high error, we can still see that with more careful measurement, the distance between the grooves on CD can be calculated by applying the concept of diffraction. The reason of the large error in this experiment is mostly because the paper and the CD may not be exactly parallel.

Experiment 10: Measuring a Human Hair

Purpose:
The purpose of this experiment is to measure the thickness of a human hair by applying Young's double slits experiment.

Experiment:
The setup of the experiment is as follow

A strand of hair is used as the slit
Experiment setup
Using laser with wavelength of 660nm, interference pattern is projected onto a white board.

Interference Pattern
After some measurement, the thickness of the hair can be calculated as follow

Calculation of thickness of the hair
where: y = distance between 2 fringes
           L = distance between the card and the white board
           d = width of the slit

We then tried to verify this value by measuring the thickness of the same hair using a micrometer.

Measuring the thickness using a micrometer.
Thickness of hair according to micrometer: 50 ± 20μm

Conclusion:
The Young's double slit experiment can successfully be used to measure the thickness of human hair. Although the calculated value and the value measured using micrometer differ by 65%, the calculated value still falls within the uncertainty range.

Monday, April 1, 2013

Experiment 9: Lenses

Purpose:
        The purpose of this lab is to analyze the characteristic of a biconvex lens and verify the relationship between the image distance, object distance, and focal length.

Experiment:
The focal length of the lens can be found by measuring when the parallel ray from the sun passing through the lens form a single bright dot.


The following apparatus is then set up

We can then measure the image distance and image height when the image is focused on a screen and the object distance is equal to 1.5f, 2f, 3f, 4f, and 5f
The image focused on a whiteboard
Measuring image distance and image height

Data and Data Analysis:
Focal Length (f) = 4.8 ± 0.5cm

d0(cm)
di(cm)
h0(cm)
hi(cm)
M
Type of image
25
7.4
8.8
2.3
0.26
Real, inverted
20
8.4
8.8
3.4
0.39
Real, inverted
15
8.9
4.0
2.6
0.65
Real, inverted
10
11.8
4.0
4.5
1.12
Real, inverted
7.5
18.3
1.1
2.8
2.55
Real, inverted

When the object distance is changed to 0.5f, the image no longer shows up on the board, however, when looked through the lens, the image is upright. This means that the image is virtual.

Graph of di vs d0

Inverse di vs d0
d0(cm)
Inverse di(1/cm)
25
0.135
20
0.119
15
0.112
10
0.085
7.5
0.055

Inverse di vs negative inverse d0
Inverse di(1/cm)
Negative inverse d0(1/cm)
0.135
-0.04
0.119
-0.05
0.112
-0.067
0.085
-0.1
0.055
-0.13

The lens equation shows that:
which implies that the slope of the graph above should be 1 and the y-intercept is 1/f.
We can then conclude that, according to the graph, the focal length should be:

f = 1/0.1653 = 6.0cm

From the regression line of the graph we can then conclude that:

Error Analysis:
The error on this experiment can be mostly contributed to measurement error. We can contribute an error of about ±3cm on all measurement due to the increments of the ruler used, ruler that is not perfectly perpendicular with the paper and the light source, and the image that may not be completely focused on the screen.

Summary:
From this experiment, we can conclude that the image created by a biconvex lens is real and inverted. The magnification of this lens vary with the object distance. As the object distance gets smaller, the magnification becomes larger. We can also conclude that if the object distance is smaller than the focal length, then the image produced by this lens become virtual and upright.